2000 Dodge Ram 1500 5.9 Rocker Arms and Springs in Action

2000 Dodge Ram 1500 5. 9 Rocker Arms and Springs in Action Heebeha

Can You Guess Whose Tattoo This Is? - Loudwire

The tattoos pay homage to a mythical creature that shares some traits with the inked individual. With a personality larger than life all of his own, these tattoos only add to his mystique. Ready to find out who it is. Click below to see.

Source: loudwire.com

Yahoo answersHow do I listen for a bad rocker arm on a pontiac 403? How do I know what one is bad?

  • Maintenance & Repairs

    Take the valve cover off of the side you suspect has the bad arm, place a towel on the fender well under the hood and have somebody start the engine and let it idle while you inspect the rocker.

Yahoo answersHow to clean rocker arm and spring?

  • Maintenance & Repairs

    Go to Walmart's automotive section and pick up a can or two of *CRC Mass Air Flow Sensor Cleaner or *CRC Throttle Body Cleaner. Either of these products will zip the crap off the gunked-up parts.

Yahoo answersIs it nessasary to remove the head on my 1989 bmw 325I to replace the rocker arm?

  • Maintenance & Repairs

    Just remove the valve cover ,then you will be able to see the rocker arms , it would be best to have the engine in time before you remove the rocker arm,because i'm sure that the sprockets.

Yahoo answerswhat is the torque on a rocker arm bolt?

  • Dodge

    you look a little young to be working on an engine but any way rocker torque for center pivot bolt is 27ft/lbs adjustment nut is 18 ft/lbs intake valve clearance is 10 thousands of an inch and.

Yahoo answersI have a rocker arm that will no allow the tap and ajusting screw to screw into the rocker home what do i do?

  • Maintenance & Repairs

    There may be a bent valve. I'm not familiar with calling anything in the valve train " the tap". There are tappets, but it seems you're only trying to adjust valve lash. If there's too much lash.

Yahoo answershow do i remove a stripped rocker arm nut?

  • Maintenance & Repairs

    that means the threads are gone. only thing you can do is cut the nut is half. and peel it off. there are tools for this. but you can sharpen a cold chisel really sharp and with a few.

Breaking News

  • Can You Guess Whose Tattoo This Is?

    This spooky tattoo features black tentacles growing out of a bulging green eye, covering most of this rocker's arm, oh, and if that wasn't enough, there's a second creature of the same design on his other arm. The tattoos pay homage to a mythical

  • NTSB Releases Details of Hatch Plane Crash

    The engine crankshaft was rotated by hand and mechanical continuity was noted throughout the engine, with the exception of the number 6 exhaust valve and rocker arm. The number 6 exhaust valve push rod was found damaged consistent with the impact.

  • Can You Guess Whose Tattoo This Is?

    Can you guess which rocker has this koi fish swimming up the inside of his arm? The exotic creature, a sign of strength, is one of many colorful tats on his arm including a “flamboyant” octopus. As for hints, this musician could easily be described as

Leave a Comment

Fields with * are required.